For nail holes and cracks up to 1/4", completely fill in with Textured DECKOVER® coating using a nylon/polyester brush and allow to dry prior to rolling. Stir product occasionally throughout application. Intermix multiple containers to ensure color uniformity.Avoid painting if humidity is expected to be greater than 80%.The surface must be completely dry before application. Do not use if rain is expected within 24 hours. Avoid applying in direct sunlight or to hot surfaces.Use product when air and surface temperatures are between 50-90˚ F (10-32˚ C).990 Concrete & Masonry Degreaser & Cleaner on sound, coated surfaces prior to coating. Use an etcher product to clean and etch uncoated concrete or No.Use a stripper product to strip peeling coating.Allow new surfaces to cure for 30 days.Concrete Surfaces: Avoid areas that are structurally weak or subject to hydrostatic pressure above 8 psi.
Lightly sand to remove remaining wood fibers/fuzz. Allow area to dry at least 24 hours before coating. When rinsing with a pressure washer, use the broadest spray pattern while keeping the nozzle at least 24" away from the surface.63, rinse thoroughly with a garden hose or pressure washer. 63 MUST be used to remove mill glaze and clean the wood surface. 63 All-In-One Wood Cleaner to neutralize the wood.
64 Wood Stain & Finish Stripper followed by BEHR PREMIUM® No.
0 kommentar(er)
